Code Update Class Testimonials |
|
2008 NEC Code Update Classes I would definitely recommend this class. Steve managed his time very well. He was able to cover needed information without being redundant. He answered all questions that were presented. --Scott J. Dick, Riverton, WY Excellent class. I should attend more often, not just when required by the state. --Tim Walker, Lander, WY I think Steve has a great program. I have taken his Journeymen Prep Class, 2 code update classes and am going to take the Master's Commercial Calculations class --Scott Warren, Casper, WY
January 16 & 17, 2009, Rapid City, SD This is a great class. Steve covers a lot but he also stops and explains everything if there are any questions. This is the third time I've taken this class --Michael Adams, Spearfish, SD First time I have ever been to one of these seminars and I will be back as class was great. --Walter Johnson, Powell WY This is a very good refresher class for anyone interested in staying informed in ouor constantly changing trade. --Tom Wethor, Buffalo, WY
December 17 & 18, 2008, Casper, WY This is the only way to go. Fantastic program; a lot more indepth than taking an update class on-line. --John Hansen, Worland, WY This course is well worth taking for both working knowledge and license renewal. --Jon A. Hildebrandt, Jackson, WY I have tried other classes/instructors. Don't feel like I learned much with them. I always have left Steve's classes with more knowledge and understanding of the NEC --Eric kuenzel, Moorcroft, WY
November 21 & 22, 2008, Casper, WY This has been the best class I have taken for code update --Peter (jim) Esquibel, Murray, UT This class was more interest and informative than others I have taken. Very well done. Instrudtor kept it interesting --Robert Lytle, Kirby, WY "Thank you for your time and making it easy for me to understand the code." --Dennis Thompson, Riverton, WY
October 30 & 31, 2008, Gillette, WY I think the changes were covered thoroughly without dwelling too long on any one thing. Good class. --Matt Parker, Casper, Wy Class was very beneficial for learning your way around the code book and a good refresher on the code. --Matt Schilz, Gillette, Wy Great Class. Steve doesn't just read code to you, he takes the time to explain. This is the third time I have taken one of Steve's classes Jeff White, Gillette, Wy
October 24 & 25, 2008, Mitchell, SD Always enjoy your classes. I always learn something new from you and the other electricans attending the class. --Wayne Helland, Yankton, SD Steve does a great job with explaining the code and related items. I will be come back for future code classes. --James Larson, Burke, SD
October 17 & 18, 2008, Cheyenne, WY Class was very informative and helpful. A good refresher --Joey Ault, Greely, Co. I hope when I have to renew again you are still doing these classes. It was well worth the timie and money. Very enjoyable. --Debra Lesher, Fort Collins, Co This course covers just about everything anyone would need to know about code changes. Instructor was very knowledgeable. --Adam Monteoya, Cheyenne, Wy
October 14 & 15, 2008, Rawlins, WY Class was well organized, informational and plenty of time for comments and discussion by class members --Rick Baxley, Rawlins, WY This class was time and money well spent. Will hep a lot out on the job. --Kevin Davis, Green River, WY
June 30, 2008, Rapid City, SD This class was very interesting. Steve was very accommodating and courtesy...very professional --David Stokes, Sioux City, IA
June 25-26, 2008, Rapid City, SD I always find Steve to be very knowledgeable on most aspects of the NEC. I always walk away from these code update courses with a better understanidng of the NEC --Adrien Adams, Sturgis, SD I always feel like I learned something and kow code changes better. --Kevin Groves, Cypress, TX I took the Exam Prep class and passed the test and I recommended it to a friend who took the course and passed his test also. I would highly recommend these Code Update classes as well as Exam Prep classes --Scott Mayer, Mt Vernon, SD I enjoy Steve's method of presentation of the NEC. I tell people "don't miss the chance to gain new understanding of the code. Good as a refresher also. --Chet Stone, Hermosa, SD
June 13-14, 2008, Rapid City, SD This is one of the best classes by far --R. Keith McGuire, Sioux Falls, SD I was very impressed with materials, presentation of materials and overal attitude of instructor. --John Rumbaugh, Parker, SD
June 7th, 2008, Rapid City, SD I would recommend Arne ElectroTech classes to everybody --Lenart Brown Eyes, Porcupine, SD This was a good class....informative and clarified a lot of questions --Clifford Gibbs, Rapid City, SD
May 29 & 30, 2008 Gillette, Wy I have recommended this course to many people. Always enjoy attending Steve's classes. --Ron Caylor, Moorcroft, WY This is a very high quality course. Steve is an excellent presenter --Roland Miller, Gillette, WY
May 22 & 23, 2008 Casper, WY Class was very informative - not boring as some I have taken. The instructor was very informed. --Keith Fletcher, Douglas, WY Great Class! I enjoyed the class and would recommend it to fellow electricians --Jim Grove, Mills, WY This is my third class with Steve. I enjoy his presentation methods and the learning environment. --Chris Hill, Douglas, WY Class was a good source of information and a good way to stay up to date on the changes in the code. --Trevor Jones, Douglas, WY I will be looking for Steve on my next class upgrade. --Laddie Wiginton, Casper, WY
May 8 & 9, 2008 Sioux Falls, SD Class was well-rounded and enjoyable. I will be back. --Jared Barger, Madison, SD Very detailed summary of code changes appicable to most common installations in this area. --Aaron Gilbertson, Volin, SD Class was a well planned 16 hour course. Good format with current changes. It is worth the time and money --Dave Neuhart, Gregory, SD
April 11 & 12, 2008 Rapid City, SD Class is informative; keeps moving, interesting topics, can apply knowledge daily --Tim Baumgartner, Raid City, SD These classes are always very beneficial --Arlie Hulm, Faith, SD The course was worth the time and I will come again! --David Patzer, Worland, WY
March 18 & 19, 2008 Hot Springs, SD Whether learning or just refresher, course is always interesting and thought provoking. --Mark Steffen, Hot Springs, SD This course is presented in a most useable format! --Steven Towne, Custer, SD
March 10-13, 2008 Evanston, WY This is one of the best classes!! --Carl Kreinbrink, Evanston, WY This is an informative course. It's interesting and keeps you awake and involved. --Bob Periman, Evanston, WY Good presentation slides and illustrations made explanation of changes to the 2008 NEC code easy to understand. --Kevin Sims, Evanston, WY
2005 NEC Code Update Classes November 30 & December 1, 2007, Casper, WY I will attended these classes in the future. Steve made it easy to understand and follow. --Tim Mitchell, Casper, WY Very good class; best I have ever participated in. --Harold Zancanata, Thermopolis, WY Steve was very good at explaining all parts of the code. He seems to enjoy teaching this class. --Wesley Tabor, Rawlins, WY This is at least my 10th code seminar but by far the best. --Joe McKee, Cheyenne, WY This is the very best and interesting code class I have attended. --Manny Meckle, Sheridan, WY
October 19 & 20, 2007 Gillette, WY I have taken this course before. It is always very good and easy to follow --Thomas C. Annis, Laramie, WY This class is very informative. There wasn't anything that I couldn't understand. --Bill Haley, Newcastle, WY The class was very beneficial. Covers a wide range of material. --Shaine Selfe, Moorcroft, WY Excellent course! Very informative plus had great material available for purchase --Edward Virgil, Gillette, WY
May 18-19, 2007 Casper, WY The material was easy to follow. Questions answered and discussion encouraged. I would attend again. --James "Mike" Carver, Inverness, FL Very good seminar; very thorough and knowledgeable on all subjects. --Rick Lobdell, Riverton, WY This is a very good and well rounded class. It had just the right amount of humor. Lots of good questions and discussion. --Norman Scott Miller, Laramie, Wy Steve did a great job in keeping my interest held between the powerpoint presentation, classroom discussion and code book overview. --Jode Parsons, Casper, Wy
July 25 & 27, 2006 Rapid City, SD I have always enjoyed and gotten allot from your seminars. I have always recommended these courses to people I talk to. --George Freeman, Rapid City, SD I tell people to take the Arne Electro Tech seminars because they are more indepth than many other electrical seminars --Theodore Burning Breast, Jr., Rosebud, SD This is the second time I have taken this course and I believe that it is the best course I have seen. --Mark Booth, Rapid City, SD
June 23-24, 2006 Rapid City, SD ... explains things in a way that everyone can understand no matter how new a person is to this field. -- Ian Rendon, Pine Ridge, SD I was glad to learn about the new code changes and to have them explained in a way that is easy to understand. -- Troy Tschappat, Westport, SD I tell people it is the only class I take every other year. The format used and the knowledge of Steve Arne (and Mike Holt's book) would be hard to top by any other classes. -- Dave Phillips, Whitewood, SD I would strongly recommend this course to others. It is a good reminder of the things you may not work with everyday. -- Jared Williams, Glenrock, WY This is a very good course and it has been for many years. Steve Arne knows the subjects and can explain them. -- Bradley Smith, Rapid City, SD
June 2-3, 2006 Rapid City, SD I would recommend others take the class as it is worth the time and money to better understand the NEC for application in our field. I enjoyed the lecture format being more open to comments and ideas from other tradesman. -- Brad Sharp, Rapid City, SD The class was very well organized. Steve is very knowledgeable with regard to course material. I would most definitely recommend the course to others. -- Frank Campagna, Belle Fourche, SD
May 20, 2006, Sioux Falls This is a very good course. I wish I had taken it a long time ago. If you are getting ready to take an exam, take this course first. Steve is definitely a good instructor. He is very helpful in helping you understand anything you may be having problems with. -- Luke VanWhhe, Sioux Falls, SD May 18-29, 2006 Sioux Falls, SD I would highly recommend this class. It was a nice blend of lecture, video and worksheets. -- Lucas Bruxvoort, Goodyear, AZ
May 12-13, 2006 Rapid City, SD Steve Arne's classes are the best learning experience for the money. I will keep coming back for my continuing education code hours. -- Calvin Yackey, Black Hawk, SD Steve made the class easy to understand and worksheets easy to work with. It is a good balance of subjects for time allotted. -- Larry Knickman, St. Louis, MO Steve answers questions until everyone understands the subject. This class helped me pass my contractor test. -- Michael Adams. Sturgis, SD Best classes I have attended; excellent class for continuing education. -- Terry Bohnet, Vale, SD These type of classes are just what I need to know the code book to help me do my job. I will tell others to take these classes as often as possible. -- Leon Janis, Pine Ridge, SD
April 28-29, 2006 Gillette, WY This class is an interesting and easy way to keep up with the new code changes -- Dale Phipps, Gillette, WY
April 4-5, 2006 Rock Springs, WY There is allot of good information presented and Steve presents the information in an understandable way. -- Wade Christensen, Green River, WY
March 28-29, 2006 Custer, SD The class is well worth the time and money, especially if you are planning on taking an exam. -- Bill Henderson, Custer, SD
March 24-25, 2006 Chamberlain, SD I would tell others "don't miss it, Steve does a great job." Steve Arne and Mike Holt make a great pair! Thanks for going slow enough for me and all others to understand the material. -- James Larson, Burke, SD It was an investment in a successful and prosperous future in the electrical industry. -- Kendall Robinson, Pierre, SD I've taken your class twice now for continuing education and I will come again! -- Wayne Helland, Yankton, SD
February 10-11, 2006 Rapid City, SD I would highly recommend attending any course offered by Steve Arne. His courses are very helpful in understanding the code to be used in our day to day applications in the field. -- Douglas Umberger, Spearfish, SD
December 1-2, 2005 Cheyenne WY The technology in my trade is advancing so rapidly and use is growing so much I find it remarkable Steve was so current on everything. These guys are a serious asset to the electrical industry. I find Mike Holt's material superior to any other and plan to attend as many Arne ElectroTech Seminars as possible. -- Norman Hardesty, Laramie, WY
November 19-20, 2005 Gillette, WY Steve is a great teacher. He keeps the class interesting and flowing with class discussion and power point slides and lectures. -- Scott Warren, Casper, WY
June 28-29, 2005 Hot Springs, SD This is a very good course; very well presented and easy to understand. Steve is very professional and enjoyable to listen to. -- Rick Steele, Hot Springs, SD
February 7-10, 2005 Evanston WY I really enjoyed the class! It is a good mix of information and exercise worksheets. -- Jeffrey Deters, Evanston, WY I would highly recommend this course as it has quality instruction, knowledgeable instructor and a fair cost per student. This class was leaps and bounds ahead of the 2002 update course (from another provider). I was very pleased with the outcome--good feedback from those involved. We will repeat this seminar! I feel we received good value vs. time and expense. -- Dave Matthews, Evanston, WY I would tell others that this class has a good instructor, is well prepared, has good materials and that in 16 hours there is good coverage of subject -- Russell Trembath, Evanston, WY
2002 NEC Code Update classes November 29-30, 2004 Rock Springs WY It was well worth my time. Thank you for sharing your knowledge and expertise. I very much enjoyed the class. -- George Hemmert, Lyman, WY This was a very worth while interesting class; all topics were informative and beneficial. -- Bryce Bay, Rock Springs, WY
October 29-30, 2004 Cheyenne WY This class is well worth the money. I took your Exam Prep class that helped me pass my masters. -- Larry Bock, Sundance, WY Best classes by far of all the seminars over the past 20+ years. -- Ernie (Hernaldo) Hervera, Douglas, WY
June 25-26, 2004 Rapid City, SD This class was interesting and informative; moved along very well. Thanks, Steve. -- Darold O'Neal, Rapid City, SD I've taken the Exam Prep class as well as Code Update and it helped me tremendously to pass the exam on the first try. I have already recommended the classes to anybody who is looking. I was a student of Steve at WDTI and felt he was an excellent instructor. I have used his courses since then. -- Tyler Bayne, Box Elder, SD
June 18-19, 2004 Sioux Falls, SD It's well worth the time. I enjoyed the classes and learned more than from any other source. -- Joshua Carpenter, Sioux Falls
June 4-5, 2004 Rapid City, SD I take these classes because there are probably non better. Steve's classes are the only ones I go to for my continuing education. -- Dave Phillips, Whitewood, SD
April 30-May 1, 2004 Rapid City, SD Best class to pick up needed hours --- Terry Bohnet, Vale, SD
October 3-4, 2003 Rapid City, SD I tell people to take this course. It is the best continuing education available. Code is very boring, but Steve keeps it interesting and humorous. -- John Eiring, Hot Springs, SD
September 26-27, 2003 Gillette, WY This is probably the fourth course I have taken and have never been disappointed. -- Ron Caylor, Moorcroft, WY
May 3 - 4, 2003 Sioux Falls, SD This is the best course I've taken in all my years. On more than one occasion the light bulb came on where it wasn't before. -- Paul Pierret, Sioux Falls, SD Brought me up to date on the code. Take it! The course was very well put together. -- Jon Leonard, Brandon SD Steve took time to talk to us on our specific questions instead of hurrying through to stay on his own agenda. The best code class I've taken. I learned more in this class than any other 16 hour code class yet. -- Troy Pierret, Sioux Falls, SD Highly recommend it. Great 2 days. Thank you- best I've been to ever. -- Joe Fink, Sioux Falls, SD If you ever need hours and want it to be very interesting, then Steve Arne's classes are what you want. Informative, great discussions with others in the trade and from the NEC. Will be back again without a doubt. Normally hate update code classes. Great class, will recommend to others and be back myself. -- Raymond Juhnke, Olivet, SD Discussion on grounding was of great value, new changes were good. Do it! Steve is patient and fun to work with. -- Doug O'Mara, Brookings, SD
June 24 - 25, 2002, Rapid City, SD I would encourage anyone who asked me to attend these seminars, for the learning, knowing and using the Code book. I have attended other seminars that the instructor just read the changes out of the Code book. This instructor first read the changes, showed the changes on the screen, then the group could discuss the changes. I learned allot from this seminar -- Bob Schlieseman, Madison, SD
June 21-22, 2002, Rapid City, SD I have never left one of your classes feeling like it was a waste of time -- Eric Kvenzel - Belle Fourche, SD Best code classes I've ever attended -- Timothy Douglas
May 31 & June 1, 2002, Sioux Falls, SD I feel like I learned more from your class than any I've attended previously. I have 31 years of experience to compare classes. -- Kim Petersen, Bushnell, SD The class was great, especially the interaction between Steve "live" and Mike "on film". Made the day go fast!! -- Dave Lingreeen, Rembrandt, IA
February 2 & 3, 2002, Rapid City, SD There is a shortage of seminars that really help. In this seminar there is "no question is a dumb question if you need to ask it." -- Dave Neuharth, Barnet, UT
March 13 & 14, 1999, Spearfish, SD This seminar is a must for all electrical contractors who want to succeed. -- Scott Neuhauser, Spearfish, SD
October 24-25, 1998, Casper, WY This was one of the best seminars that I've attended. --Wade Olson, Casper, WY
July 11-12, 1998, Rapid City, SD This was a very good class. I would rate it as one of the best I have attended. --Doug Nurnberg, Forestburg, SD
June 20, 1998, Rapid City, SD The class was informational and interesting. Probably the best class I've taken in my electrical career. -- Tim Cleveland, Belle Fourche, SD
June 13-14, 1998, Chamberlain, SD The informational retention of this hands on style (worksheets) makes this class far more beneficial than previous classes I have attended. --Will Andersen, Lake City, MN This course is very intune with today's issues. It is made easy to understand, great learning experience in a fun class environment. Thanks for the learning experience and sharing your knowledge. Steve creates a fu, relaxes and very comfortable learning environment. I will highly recommend your courses and will plan to attend them again. Thanks again! --Steve Odland, Sioux Falls, SD
April 25-26, 1998, Spearfish, SD It was very interesting and kept my attention, was the best continuing education course I have been attended. --Barry Tolsma, Lead SD This was made clear the process for doing all necessary calculations. I was very satisfied. --Steve Holstein, Spearfish, SD |
